Pro Series 18mm Amber Distance Gauges | Qty 5

18mm Distance Gauges for all Candela Pro Series lasers enhance the precision of the laser treatment by providing clear measurements for optimal targeting and safety during procedures. Increased beam clearance through the distance gauge significantly eliminates flashing and extends the life of the device.

Compatible with:

• Candela GentleLASE Pro
• Candela GentleLASE Pro-U
• Candela GentleMAX Pro
• Candela GentleYAG Pro

Additional Details:

• QTY 5
• Packaged in stackable boxes
• Not compatible GentleLASE Pro, GentleLASE Pro-U, GentleMAX Pro

Also available in 6-8mm, 10mm, 12mm, 15mm, 20mm, 22mm, 24mm

Cleaning the Distance Gauges Using a Swipe Clean Cycle
Perform a swipe clean cycle every 40-50 laser pulses or sooner if you detect significant
flashing or if you note additional debris build-up. This procedure takes minimal time to perform.
1. Swipe a paper towel or piece of gauze moistened with warm water across the patient
contact surface of the distance gauge tip or ring.
2. As the towel passes across the surface, allow your index finger to push into the ring
slightly and rotate. You are cleaning a portion of the inner surface of the ring.
3. Continue the treatment.
Cleaning the Distance Gauges Using a Full Cycle
Perform a full cycle clean after each individual patient treatment.
1. Prepare a soaking container with chlorine bleach, suitable for disinfecting and cleaning.
The bleach should not contain any other chemicals or softeners. Add tap water (distilled
water is not necessary) to make a solution.
A 10 % bleach solution can be prepared by mixing one (1) part bleach to nine (9) parts
water.
2. Place the distance gauges into a container and soak overnight.
3. Scrub all surfaces of the distance gauge body with a toothbrush and rinse with clean
water.
4. Let the distance gauge “air dry”.